| 206 | 0 | 194 |
| 下载次数 | 被引频次 | 阅读次数 |
在简要介绍爆炸喷涂碳化物涂层特点的基础上，分析了当前碳化物耐磨涂层主要材料WC-Co和Cr_3C2-NiCr研究现状并介绍了相组成，介绍了碳化物耐磨涂层工艺研究情况，阐述了碳化物耐磨涂层耐磨损性能及磨损机制、热腐蚀性能及腐蚀机制，最后就爆炸喷涂碳化物耐磨涂层的应用及未来发展进行了总结与展望。
Abstract：The characteristics of detonation gun sprayed carbide coatings were introduced, the current research status of the main materials for wear-resistant carbide coatings, namely WC-Co and Cr_3C2-NiCr, were analyzed, and their phase compositions were discussed.The research status of the processes for carbide wear-resistant coatings, elaborates on the wear resistance performance and wear mechanisms, as well as the thermal corrosion performance and corrosion mechanisms of carbide wear-resistant coatings were also presents.Finally, the applications and future development of detonation gun sprayed carbide wear-resistant coatings were summarized.
[1] 李长久.热喷涂技术应用及研究进展与挑战[J].热喷涂技术，2018,10(4):1-22.LI C J.Applications,research progresses and future challenges of thermal spray technology[J].Thermal Spray Technology,2018,10(4):1-22.
[2] 张伟，郭永明，陈永雄.热喷涂技术在产品再制造领域的应用及发展趋势[J].中国表面工程，2011,24(6):1-10.ZHANG W,GUO Y M,CHEN Y X.Application and future development of thermal spraying technologies for remanufacturing engineering[J].China Surface Engineering,2011,24(6):1-10.
[3] 李俊辰，谢京，郭双全，等.热喷涂材料及其在航空发动机中的运用[J].材料导报，2016,30(S2):582-585.Li J C,Xie J,Guo S Q,et al.Thermal spray material and its application on aeroengine[J].Materials Reports,2016,30(S2):582-585.
[4] 尹志坚，王树保，傅卫，等.热喷涂技术的演化与展望[J].无机材料学报，2011,26(3):225-232.YIN Z J,WANG S B,FU W,et al.Evolution and prospect of thermal spraying technique[J].Journal of Inorganic Materials,2011,26(3):225-232.
[5] GUESSASMA S,MONTAVON G,CODDET C.Velocity and temperature distributions of alumina-titania in-flight particles in the atmospheric plasma spray process[J].Surface and Coatings Technology,2005,192(1):70-76.
[6] 解路，熊翔，王跃明.不同热喷涂技术制备铁基非晶涂层的结构和耐磨性能[J].粉末冶金材料科学与工程，2019,24(3):212-219.XIE L,XIONG X,WANG Y M.Microstructure and tribological properties of plasma,high velocity oxy-fuel and detonation sprayed iron-based coatings[J].Materials Science and Engineering of Powder Metallurgy,2019,24(3):212-219.
[7] MURTHY J K N,RAO D S,VENKATARAMAN B.Effect of grinding on the erosion behaviour of a WC-Co-Cr coating deposited by HVOF and detonation gun spray processes[J].Wear,2001,249:592-600.
[8] KAMAL S,JAYAGANTHAN R,PRAKASH S,et al.Hot corrosion behavior of detonation gun sprayed Cr3C2-NiCr coatings on Ni and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 ℃[J].Journal of Alloys and Compounds,2008,463(1-2):358-372.
[9] BABU P S,BASU B,SUNDARARAJAN G.Abrasive wear behavior of detonation sprayed WC-12Co coatings:Influence of decarburization and abrasive characteristics[J].Wear,2010,268(11-12):1387-1399.
[10] VASHISHTHA N,KHATIRKAR R K,SAPATE S G.Tribological behaviour of HVOF sprayed WC-12Co,WC-10Co-4Cr and Cr3C2-25NiCr coatings[J].Tribology International,2017,105:55-68.
[11] 杨晓彬，于月光，刘海飞，等.爆炸喷涂纳米WC_12Co涂层的性能[J].有色金属，2007,59(2):22-24.YANG X B,YU Y G,LIU HAIFEI,et al.Properties of WC-12Co nanostructured coatings prepared by detonation spraying[J].Nonferrous Metals,2007,59(2):22-24.
[12] 张松，张开祥，胡方，等.爆炸喷涂WC-12Co/MoS2复合涂层的摩擦磨损性能[J].焊接学报，2010,31(12):49-52.ZHANG S,ZHANG K X,HU F,et al.Frictional and wear performance of WC-12Co/MoS2 composite coatings by detonation gun sprayed[J].Transactions of the China welding institution,2010,31(12):49-52.
[13] 王铁钢，李柏松，阎兵，等.爆炸喷涂WC-Co-MoS2-Ni多层复合自润滑涂层的摩擦学行为[J].材料工程，2017,45(3):73-79.WANG T G,LI B S,YAN B,et al.Tribological behavior of multi-layered WC-Co/MoS2-Ni self-lubrication coating fabricated by detonation gun spraying[J].Journal of Materials Engineering,2017,45(3):73-79.
[14] 田浩亮，王长亮，郭孟秋，等.爆炸喷涂WC-12Co自润滑耐磨涂层工艺及性能研究[J].稀有金属材料与工程，2020,49(3):1058-1067.TIAN H L,WANG C L,GUO M Q,et al.Technology and properties of WC-12Co self-lubricating wear-resistant coating by explosive spraying[J].Rare Metal Materials and Engineering,2020,49(3):1058-1067.
[15] 于洋，田浩亮，王长亮，等.石墨烯含量对石墨烯改性WC-Co自润滑耐磨涂层性能的影响[J].金属热处理，2018,43(10):173-178.YU Y,TIAN H L,WANG C L,et al.Effect of graphene content on properties of self-lubrication and wear resistant GO/WC-Co coating[J].Heat Treatment of Metals,2018,43(10):173-178.
[16] 赵立英，刘平安.氧燃比对爆炸喷涂碳化钨涂层结构和性能的影响[J].材料工程，2016,44(6):50-55.ZHAO L Y,LIU P A.Effects of oxygen-fuel ratio on structure and property of detonation gun sprayed WC coating[J].Journal of Materials Engineering,2016,44(6):50-55.
[17] 王铁钢，宋丙红，华伟刚，等.工艺参数对爆炸喷涂WC-Co涂层性能均匀性的影响[J].金属学报，2011,47(1):115-122.WANG T G,SSONG B H,HUA W G,et al.Influence of process parameters on the performance uniformity of detonation gun sprayed WC-Co coatings[J].Acta Metallurgica Sinica,2011,47(1):115-122.
[18] DU H,HUA W G,LIU J,et al.Influence of process variables on the qualities of detonation gun sprayed WC-Co coatings[J].Materials Science and Engineering A,2005,408(1-2):202-210.
[19] 张锤，柏洪武，王群，等.氧燃比对爆炸喷涂WC-17Co涂层组织和性能的影响[J].热加工工艺，2013,42(2):145-148.ZHANG C,BAI H W,WANG Q,et al.Effect of ratio of oxygen and fuel on microstructure performance of WC-17Co coating deposition with denotation gun spray process[J].Hot Working Technology,2013,42(2):145-148.
[20] 赵立英，李国太，吴清军，等.氧燃比对爆炸喷涂WC-12Co涂层组织和力学性能的影响[J].表面技术，2016,45(1):131-136.ZHAO L Y,LI G T,WU Q J,et al.Effect of oxygen-fuel ratio on the microstructure and mechanical properties of WC-12Co coating deposited by detonation spraying method[J].Surface Technology,2016,45(1):131-136.
[21] BABU P S,BASU B,SUNDARARAJAN G.Processing-structure-property correlation and decarburization phenomenon in detonation sprayed WC-12Co coatings[J].Acta Materialia,2008,56(18):5012-5026.
[22] MURTHY J K N,VENKATARAMAN B.Abrasive wear behaviour of WC-CoCr and Cr3C2-20(NiCr) deposited by HVOF and detonation spray processes[J].Surface and Coatings Technology,2006,200(8):2642-2652.
[23] BABU P S,BASU B,SUNDARARAJAN G.The influence of erodent hardness on the erosion behavior of detonation sprayed WC-12Co coatings[J].Wear,2011,270(11-12):903-913.
[24] 刘文朝，牛显明，李佐政，等.GH864表面爆炸喷涂Cr3C2-NiCr涂层的显微组织和高温摩擦性能研究[J].热加工工艺，2020,49(18):100-103.LIU W Z,NIU X M,LI ZUOZHENG,et al.Study on microstructure and high temperature friction properties of Cr3C2-NiCr coating on GH864 surface by explosive spraying[J].Hot Working Technology,2020,49(18):100-103.
[25] 张有茶，贾成厂，何利民，等.NiCr-Cr2O3-BaF2/CaF2爆炸喷涂涂层干滑动摩擦磨损性能[J].润滑与密封，2010,35(3):57-61.ZHANG Y C,JIA C C,HE L M,et al.Dry sliding tribological performances of detonation sprayed NiCr-Cr2O3-BaF2/CaF2 coating[J].Lubrication Engineering,2010,35(3):57-61.
[26] SINGH P K,MISHRA S B.Erosion performance of detonation gun deposited WC-12Co,Stellite 6 and Stellite 21 coatings on SAE213-T12 steel[J].Tribology-Materials,Surfaces & Interfaces,2020,14(4):229-239.
[27] DU H,SUN C,HUA W G,et al.Structure,mechanical and sliding wear properties of WC-Co/MoS2-Ni coatings by detonation gun spray[J].Materials Science and Engineering A,2007,445-446:122-134.
[28] HUANG C B,DU L Z,ZHANG W G,et al.Microstructure,mechanical and tribological characteristics of plasma,detonation gun and HVOF sprayed NiCr/Cr3C2-BaF2/CaF2 coatings[J].Surface Engineering,2011,27(10):762-769.
[29] ULIANITSKY V,BATRAEV I,DUDINA D,et al.Enhancing the properties of WC/Co detonation coatings using two-component fuels[J].Surface and Coatings Technology,2017,318:244-249.
[30] MURTHY J K N,BYSAKH S,GOPINATH K,et al.Microstructure dependent erosion in Cr3C2-20(NiCr) coating deposited by a detonation gun[J].Surface and Coatings Technology,2007,202(1):1-12.
[31] PARK S Y,KIM M C,PARK C G.Mechanical properties and microstructure evolution of the nano WC-Co coatings fabricated by detonation gun spraying with post heat treatment[J].Materials Science and Engineering A,2007,449-451:894-897.
[32] KAMAL S,JAYAGANTHAN R,PRAKASH S.Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2-25%NiCr coatings on nickel-and iron-based superalloys[J].Surface and Coatings Technology,2009,203:1004-1013.
[33] KAMAL S,JAYAGANTHAN R,PRAKASH S.High temperature oxidation studies of detonation-gun-sprayed Cr3C2-NiCr coating on Fe-and Ni-based superalloys in air under cyclic condition at 900 ℃[J].Journal of Alloys and Compounds,2009,472(1-2):378-389.
[34] KAUR M,SINGH H,PRAKASH.Surface engineering analysis of detonation-gun sprayed Cr3C2-NiCr coating under high-temperature oxidation and oxidation-erosion environments[J].Surface and Coatings Technology,2011,206:530-541.
[35] SALADI S,MENGHANI J,PRAKASH S.Hot corrosion behaviour of detonation-gun sprayed Cr3C2-NiCr coating on Inconel-718 in molten salt environment at 900 ℃[J].Transactions of the Indian Institute of Metals,2014,67(5):623-627.
[36] MEHTA J,GREWAL J S,SADASIVUNI K K,et al.Analysis of wear behavior and surface properties of detonation gun-sprayed composite coating of Cr3C2-NiCr-CeO2 on boron steel[J].Proceedings of the Institution of Mechanical Engineers,Part L:Journal of Materials:Design and Applications,2019,233(12):2433-2443.
[37] SALADI S,MENGHANI J,PRAKASH S.Effect of CeO2 on cyclic hot-corrosion behavior of detonation-gun sprayed Cr3C2-NiCr coatings on Ni-Based superalloy[J].Journal of Materials Engineering and Performance,2015,24(3):1379-1389.
基本信息:
中图分类号:TG174.4
引用信息:
[1]叶俊华,张川,黄一雄,等.爆炸喷涂制备碳化物耐磨涂层研究进展[J].热喷涂技术,2024,16(04):1-11.
基金信息:
四川省“十四五”航空与燃机重大科技专项(2022ZDZX0034)
2024-12-25
2024-12-25